How to adjust the temperature of TCL refrigerator
With the popularity of smart homes, TCL refrigerators are favored by more and more consumers because of their high cost performance and intelligent functions. However, many users have questions about the temperature adjustment method during use. This article will introduce in detail the temperature adjustment method of TCL refrigerators, and attach recent hot topics on the Internet for readers' reference.
1. TCL refrigerator temperature adjustment steps
1.Find the control panel: The temperature control panel of most TCL refrigerators is located inside or on the top of the refrigerator compartment, and some models have a touch screen design.
2.Select adjustment mode: Usually there are two modes: "intelligent" and "manual". The smart mode will automatically adjust according to the ambient temperature, while the manual mode needs to be set by yourself.
3.Set specific temperature: Adjust through the "+" and "-" buttons or slide the touch bar. It is recommended to be 2-5℃ in the refrigerator and below -18℃ in the freezer.
4.Confirm to save: Some models need to press and hold the confirmation button for 3 seconds to take effect.
| Refrigerator type | Refrigerator temperature range | Freezer temperature range |
|---|---|---|
| Single door mini refrigerator | 2-10℃ | - |
| Double door standard refrigerator | 0-8℃ | -16~-24℃ |
| Multi-door smart refrigerator | 1-10℃(can be set by partition) | -18~-26℃ |
2. Temperature recommendations in different seasons
According to changes in ambient temperature, it is recommended to make the following adjustments:
| season | Refrigerator recommended temperature | Recommended freezer temperature |
|---|---|---|
| summer | 4-6℃ | -20℃ or less |
| winter | 2-4℃ | -18℃ or so |
| rainy season | 3-5℃ | -22℃ or below (to prevent frost) |
3. Frequently Asked Questions
1.Q: The temperature does not change immediately after adjustment?
A: It takes 2-6 hours for the refrigerator to stabilize to the new set temperature, which is normal.
2.Q: Does the "ER" code appear on the display?
A: Usually it is a sensor failure. It is recommended to restart after 15 minutes of power outage. If the problem still occurs, please contact after-sales service.
3.Q: Is the temperature in smart mode inappropriate?
A: You can switch to manual mode, or check whether the refrigerator is too close to the heat source (a distance of more than 10cm should be maintained).
4. Recent hot topics on home appliances (last 10 days)
| Ranking | topic | heat index |
|---|---|---|
| 1 | Summer Energy Saving Appliances Buying Guide | 98,000 |
| 2 | How to quickly deal with refrigerator frost | 72,000 |
| 3 | Smart refrigerator data privacy issues | 65,000 |
| 4 | Review of TCL’s new cross-door refrigerator | 59,000 |
| 5 | The best storage temperature of food ingredients | 43,000 |
5. Temperature adjustment tips
1. When using a new refrigerator for the first time, it needs to run without load for 6 hours before adding food.
2. Cleaning the condenser once a month can improve cooling efficiency
3. Food storage should not exceed 70% of the volume.
4. The aging of the door seal will cause air conditioning to leak. You can use A4 paper to test the sealing (preferably it will not be easy to pull out after clamping).
Through the above detailed introduction, I believe you have mastered the method of adjusting the temperature of TCL refrigerator. Properly setting the temperature can not only ensure the freshness of food, but also effectively save electricity. If you encounter a problem that cannot be solved, it is recommended to obtain professional support through TCL’s official customer service channels.
check the details
check the details
en
